ベストセラーズ

Sharp Spikes But Not Secure

The "Chastity Glans Ring Spiky" is a variation of the KTB, or Kali's Teeth Bracelet. A KTB is designed to be worn about the penile shaft and is intended to be unnoticable when the penis is flacid but designed to cause intense pain during an errection. The KTB is my (and my wife's) favorite CBT device, and we have tried many of them. I would rate this version somewhere in the middle of the pack.

Ideally a KTB should look serious, cruel and intimidating. The thought of being forced to wear one of these devices should put fear and dread into the heart of the male slave. Paradoxically these are the very qualities that make so may of us want to wear them.

This Spiky Ring looks both beautiful and sadistic. The polished stainless steel, rounded edges and the sharp looking cone spikes give this device a look of efficient, professional punishment and torture. The quality materials actually make this look as close to a piece of art as a CBT device can look (as compared to other devices which sometimes look like they were made in someone's basement or garage).

The ring itself has a thickness of 5/16" (8mm). The outside diameter is 1 3/8" (35mm), the inside diameter is 1" (25mm) and the diameter between tips of the spikes is 3/4" (19mm). The spikes themselves have a length of 3/32" (3mm). The ring weighs about 1 oz (30g).

I am on the small side so I find these dimensions perfect. The spikes are noticeable when first placing the ring onto the glans head, but once in place the device is quite comfortable and mostly unnoticeable. The minimal weight is a good thing- if you keep your mind distracted from those forbidden thoughts then you won't even notice the ring in place.

Now for the spikes themselves. I love these spikes! These are sharp! They are actually the sparpest spikes I have ever encountered on any of these devices. The spikes are not needle sharp, they will not immediately pierce the skin and draw blood upon contact, but they are certainly not dull or blunt (this is a Good Thing!). The spikes themselves are cone shaped and look to be purposefully made for this ring. They look so much nicer than the spikes on many other devices which sometimes simply use nails, screws or staples.

Now for the reasons this ring only received three stars-

I deducted the first star because of the lack of a locking feature. This device opens instantaneously at the touch of the spring loaded lever. KTB afficiodonoes ideally want something that locks in place. They want to know that they *can't* get out without a key (or at least some type of tool such as a hex wrench). They want the feeling of helplessness knowing that once the teeth start biting there is *no possibility* of stopping them or removing the device quickly. This cruelty is what is so appealing.

The second star was deducted because the latch itself just isn't that secure. The latch has a hair trigger and comes undone at the slightest touch. I haven't worn this out of the house for fear that the latch might press against my pants and undo without my noticing and the ring could eventually fall off and might even fall out of my pants. The 3/4" diameter between the tips of the spikes is the same as the "small" size for may KTBs, so I decided to see how the ring would work when placed on the shaft of my penis instead of the glans head. All was fine at first, the ring closed and the spikes pressed into the flesh not hard enough to be painful, but enough so that the ring wouldn't be moving. I started thinking those Forbidden Thoughts and the spikes started to become pleasantly painful when suddenly the latch popped open and the ring almost fell off. I can hold the ring with a thumb and index finger on each side of the opening and pull ever so slightly and the ring will open. The latch closure is very shallow and consequently not very secure. It's possible that some of the larger guys might experience this same problem while wearing the ring on the glans head.

With a few modifications this could become one of the finest KTBs available. My advice to the MEO design team,

1) Extend the length of the device to about 1" (254mm) so that it can be worn on the penis shaft.
2) Add some type of locking mechanism.
3) Add many more spikes. Keep the spikes sharp!
4) Keep the wight down to a maximum of 4 oz (120g), the device needs to be unoticiable when flacid.
5) Offer different diameters and length of spikes.

• 5 out of 5 people found this review useful.